Reloading

The “Covid Quarantine” has me catching up on a few things. One of them was reorganizing and sorting the reloading supplies. I knew I had an eclectic mix of things, with a variety of powder leftovers from experiments and others who got out of reloading, components bought on sale for different calibers at different times, and with different cartridges and different loads, well… it accumulates. I needed to have a better idea what I had, and what was the limiting item(s) for turning components into functional, safe, reliable, and consistent ammo.

I didn’t realize how much empty brass I had. Even after I’d spent time topping off the 40 S&W, 38 Spl, and 357 reserves, I had a lot of brass: more than 2k 223Rem, over a thousand 308 Rem, more than 3k 10mm, and so-forth. And that’s before I found out my brother had more than 500 pieces of 375 H&H Mag brass saved up to reload. Primers are OK (though they won’t be when I’m done), bullets good for everything except the 375, and the short spot is looking like powder. Not that I’m about out, but just those four types (before I get to the 44 mag, 41 mag, 6.5×55, 30-06, 45 ACP, or anything else) need on the order of

3000x11gr=33,000
2000x25gr=50,000
1000x45gr=45,000
500x80gr=40,000
168,000 gr = 24 pounds of powder as a starting point.

I don’t have that much of the right stuff just lying around. Partial, and could-do-in-a-pinch powder choices, yes, but not enough for that sort of total. Lucky for me, my normal online supplier had some that are appropriate at a reasonable price, even after adding hazmat and shipping. And to show how tight supplies are, I managed to snag the last canister of not just one but two different powders, and a box of primers (you really want the best magnum large rifle primers when trying to touch off 80 grains of slow powder for a dangerous game cartridge; skimping on components for such a round seems… sub-optimal).

Midway has only 12 of 69 SKUs of primers in stock (nearly all shotgun), slightly more than half their bullet SKUs, and 81 items of powder listed as “out of stock, no back order,” though that seems to be improving.

So it looks like I get to keep on making small boom-fodder for my bang-sticks.

2 thoughts on “Reloading

  1. Lately, I have been doing more consolidation. I always wanted a rock island 10mm. Then came, OK, new gun, holster, mags, brass, bullets, on and on. Then came the thought. Hard times. I got a 20 rnd. 9mm. I got a 14 rnd. 45. Completely outfitted. And one can never have to much ammo.
    I started swapping things around. Got a ton of old 30-06 brass. Spent the winter turning it into 6.5 creedmoor. Things like that.
    I miss my 375 H&H. But it was really around just for kicks. And what fun kicks they were! That $1500.00 I got for it went toward something far more utilitarian.
    The big problem is one never gets over the loss. Hard times, hard choices.

    1. Something I realized during this most recent run on guns and ammo: having common guns in common cartridges and a stock of ammo is good, but having a couple of much less common guns isn’t a bad thing either. Many places were out of 9mm and 45 and 357 mag, but still had 10mm and 357 SIG. Out of 308 and .223 and .30-30, but they had 6.5 Creedmore and 5.45×39 Russian. If you have a little extra room, and can afford it, a variety isn’t bad. But yes, come times of hard choices, it won’t be fun. Hopefully things will go well enough I can pass them all on to kids, and grandkids one day.

Leave a Reply to MTHead Cancel reply

Your email address will not be published.